Modules are pre-engineered to your specifications

  Minimal maintenance

  Module delivered assembled with only cooling water,sample and drain connections required for start-up

  Protection of instrumentation

  List of options accommodates conditioning for any sample

  Ensure correct sampling conditions

  Convenient stainless steel sink holds grab sample bottle and acts as drain

  Handles wide range of samples, pressures and temperatures for peak performance

  Unit is compact and lightweight

  Variety of analyzers can be mounted directly onto unit with larger plate

  Unit is compact and lightweight

  Variety of analyzers can be mounted directly onto unit with larger plate

Sample Specifications

Pressure
Low Pressure: 0 – 1000 psig / 70 bar; High Pressure: 1000 – 5000 psig / 350 bar

Temperature
Low Temp:0– 450°F / 232°C;High Temp:up to 1000°F / 537°C

Flow
Up to 1500 ml/min

Cooling Water Specifications

Pressure
35 – 150 psig / 2.45 – 10.5 bar

Temperature
Up to 100°F/37°C

Flow
4–12 gpm / 15.14 – 45.43 ml/min

Cooling water inlet/outlet connections:
from 3/8” FNPT to 3/4” FNPT

System Specifications

Backplate
17“ x 27“ / 43.1 x 68.58 cm;304SS

Grab sample sink
304SS with 1/2” FNPT drain connection

High pressure inlet valve
1/4”OD compression type (for hot liquid) or 3/8”OD compression type (for steam). Inlet valve packing can be Teflon, PEEK or Grafoil.

Coolant isolation and throttling valves
BNZ

High temp thermal shut-off valve
304SS (for 0 – 3000 psi) or 316SS (for > 3000 psi) W6501

High pressure reducing valve
316SS

Temperature gauge
0–200°F/93°C;316SS

Pressure gauge
0–60 psig / 0 – 4.2 bar;316SS

Back pressure regulator
0–50 psig / 0 – 3.5 bar;316SS

Analyzer flowmeter
20 – 240 ml/min;acrylic and 316SS;with 1/4“ compression fitting outlet