3045 Copper Analyzer

Waltron’s 3045 Copper Analyzer is the most advanced instrument available on the market today for online measurement of dissolved copper.

The 3045 stands alone as capable of delivering the most accurate and precise results for ultra-pure water applications.

 Accurate and wide-range analysis


 Multi-stream available


 Fast loop reservoir


 Adjustable cycle and calibration frequency


 Automatic calibration and validation (QA/QC)


 Compact design


 Color touchscreen display


 Grab sample capability


 Internal datalogger


 Low reagent level alarm


 Automatic start/stop based on sample flow detection


 Minimal analyzer maintenance

PERFORMANCE

Range
0–1000ppb, 0–3000ppb


Accuracy
+/– 2% of full scale


Reproducibility
+/– 2% of reading


Analysis Time
7min, batch process


Sampling Frequency (Cycle Time)
One reading every 15 mins, adjustable


Sensor Classification
Colorimetric with glass flowcell and LED source


Power Supply
110-220Vac, 50-60 Hz 80 VA


Humidity
Up to 90% not condensable


Ambient Temperature Range
10-45°C analyzer (50-113°F)


Positioning and Installation Details
Wall mounting, bench supported, or panel mounting (optional)


Alarms
2 or 4 configurable alarm relays


Degree of Protection
IP55 (NEMA 4): Wet section, IP65 (NEMA 4x): Electronics


Required Maintenance
Once a month replenish reagents, Quarterly replace tubing


Reagent Consumption (approximate)
3 reagents, 2L each per month


Materials in Contact with Sample
Glass, Silicone, Plexiglass, Stainless Steel AISI 316


Certification (on request):
Meets low voltage and low electromagnetic compatibility directives


Sample Conditioning Requirements
Filtering between 10 and 60 micron, depending on the matrix, needed only to avoid clogging.


Weight
17 kg (37.5 lbs.)

SAMPLE DELIVERY OPERATING CONDITIONS

Temperature Range
5-55º C (41-131º F)


Inlet Sample
100–500 ml/min, atmospheric, flexible tubing O.D. 1/4" (6 mm)


Outlet Sample
Atmospheric, waste tubing O.D. 3/8 (9 mm)


PH
3-12

SIGNAL OUTPUTS

Analog Outputs
4-20mA (galvanic isolator module available as option) or 0-5V


Serial I/O for Signals
RS232, RS485; MODBUS; PROFIBUS

OPERATIONAL CALIBRATION

Frequency/Intervals
Recommended: 7 days


Single/Multi Point
Multi-Point: zero and mid range


Matrix Corrections
Yes, sample blank correction


Manual/Automatic
Both



  

Need Assistance?

Our team is here to help. We're happy to discuss our products and services.

Main:

+1 908 534 5100

Europe Sales & Service:

+31 85 065 45 50

China Sales & Service:

+86 135 8486 4870