3042 Phosphate Analyzer

Waltron’s 3040 series colorimetric analyzers provide exceptional results for online measuring of silica, phosphate and other parameters.

Small size and compact layout make the 3040 series an excellent choice for a variety of applications and environments. Waltron’s 3040 series colorimetric analyzers have been completely redesigned to offer unique and simplified configurations compared to previous models.

 Accurate and wide-range analysis


 Multi-stream available


 Fast loop reservoir


 Adjustable cycle and calibration frequency


 Automatic calibration and validation (QA/QC)


 Compact design


 Color touchscreen display


 Grab sample capability


 Internal datalogger


 Low reagent level alarm


 Automatic start/stop based on sample flow detection


 Minimal analyzer maintenance

PERFORMANCE

Sensor Classification
Colormetric with glass flowcell and LED source


Application
Boiler water, and cooling water


Digital Outputs
Communication interface via RS-232 & RS-485 using MODBUS RTU protocol


Power Supply
110-220Vac, 50-60 Hz 80 VA


Humidity
Up to 90% not condensable


Ambient Temperature Range
10-45º C analyzer (50-113º F)


Range
0 – 5ppm, 0 – 20ppm; 0 – 150ppm*, 0 – 750ppm*
*By Auto Dilution


Accuracy
+/– 2% of full scale


Unit Dimensions
Height=23.6”(60 cm), Width=15”(38 cm), Depth=8.3”(21 cm)


Atmospheric Pressure Range
No Limits


Positioning and installation details
Wall mounting or with bench support, panel mounting (optional)


Response Time (approximate)
<10min, batch process, programmable cycle>


Alarms
2 or 4 configurable alarm relays


Reproducibility
+/– 2% of reading


Degree of Protection (approximate)
IP55 (NEMA 4): Wet section, IP65 (NEMA 4x): Electronics


Required Maintenance
Once a month replenish reagents, Quarterly replace tubing


Reagent Consumption (approximate)
1 or 2 reagents (depending on range), 2L each per month


Materials in Contact with Sample
Glass, Silicone, Plexiglass, Stainless Steel AISI 316


Certification (on request):
Meets low voltage and low electromagnetic compatibility directives


Sample Conditioning Requirements
Filtering between 10 and 60 micron, depending on the matrix, needed only to avoid clogging.


Weight
17 kg (37.5 lbs.)

SAMPLE DELIVERY OPERATING CONDITIONS

Temperature Range
5-55º C (41-131º F)


Inlet Sample
100–500 ml/min, atmospheric, flexible tubing O.D. 1/4


Outlet Sample
Atmospheric, waste tubing O.D. 3/8


Turbidity
Not applicable, sample blank correction


Color
Not applicable, sample blank correction


PH
3-12

SIGNAL OUTPUTS

Analog Outputs:
4-20mA (galvanic isolator module available as option) or 0-5V


Serial I/O for Signals:
Serial data output RS232 standard, RS485 available as option

OPERATIONAL CALIBRATION

Frequency/Intervals
Recommended: 7 days


Single/Multi Point
Multi-Point: zero and mid range


Matrix Corrections
Yes, sample blank correction


Manual/Automatic
Both



  

Need Assistance?

Our team is here to help. We're happy to discuss our products and services.

Main:

+1 908 534 5100

Europe Sales & Service:

+31 85 065 45 50

China Sales & Service:

+86 135 8486 4870